NIKKIDENSO

Product Information

τDISC Servo Motor

τLinear Servo Motor

τServo Compass

AC Servo Motor

AC Servo Controller

AC Servo Driver

τLinear Stage

Special Control System


	Site policy



	Please look at 6 kinds of our original control functions that were materialized by the latest control technology control theory and control algorithm. They are classified to the purpose of machine usage.

※Check for graph data

Free curve control

For Torque and tension control

For Synchronizing control

Flying Positioning control

For general Positioning control

For Total Positioning control



	For your better understanding for Nikki’s control technologies, we would like to pick up “Perfect Servo Lock” and “Speed Stability” as the introduction.

○Perfect servo lock This term may not be familiar to many people. It refers to one of the functions to stop the motor to be static. Nikki Denso achieved to keep the motor in completely static with in +/- 1 pulse.	<↑Click here to see expanded view.>

○The graph is showing the performance of τ linear NVA-AM. The speed fluctuation rate is only +/- 0.04% when it is running at very slow speed of 10mm/sec for 15 seconds. You will find that this specification is remarkable if you would compare it with the others.
Please notice the difference in the measurement condition between Nikki Denso and the others. The measuring speed in the most of case is same (around 1mm/sec.). The traveling time of the other companies, however, is shorter (about 5 to 10 sec.) than Nikki Denso, and mostly the load that the others are putting is much lighter (around 1Kg) than ours.

<↑Click here to see expanded view.>