| |
 |
 |
|
|
|
|
VC-C series is the servo controller with Motion controller (NC) functions. The series is consisted from three types: C-1, C-3, and C-6. Each type has the specialized functions of continuous position function, Spinner function, Flying-cutter function, Free-curve control. Based on general positioning functions control technology, VC-C series is able to perform more complicated control operations such as “synchronous ratio control” and “continuous curve synchronous control” with data editing software.
VC-C series is applicable not only τdisc/linear servomotors, but it also can be sued with the most synchronous AC servomotors in line-ups. |
|
|
|
|
| |
| |
 |
|
| |
Driver functions:
○Inner analog speed control function
○Inner analog torque control function
○Pulse train command control function
○Feed back maximum frequency 16Mpps / Carrier frequency 25Hz
○CC-link and DeviceNet can be used
○Real time gain setting function |
|
Controller functions:
○Home return function
○Manual mode drive function
○Serial communication drive function
○Program drive function
○Positioning / Spinner function, Free curve control, Torque limit, backlash correction
○Absolute positioning functions *1
*1: Only applicable for AC servomotor with 17bit encoder |
| |
| |
 |
|
| |
Basically it is synchronous ratio control function. You can set the relative position of slave axis (vertical axis) against the master axis (horizontal axis) by making the consecutive curve patterns to make follow-up operation. Using data editing software, it is possible to memorize 50,000 points and maximum 500 patterns. >>Details |
|
| |
|
